Table of Contents
Advertisement
Adding IVR Virtual Domain
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Command
Step 4
switch(config-afid-db)# switch-wwn
20:00:00:0c:91:90:3e:80
default-autonomous-fabric-id 5
switch(config-afid-db)# no switch-wwn
20:00:00:0c:91:90:3e:80
default-autonomous-fabric-id 5
Verifying the AFID Database
View the contents of the AFID database using the show autonomous-fabric-id database command.
switch# show autonomous-fabric-id database
SWITCH WWN
--------------------------------------------------------------
20:00:00:0c:91:90:3e:80
Total:
SWITCH WWN
--------------------------------------------------------------
20:00:00:0c:91:90:3e:80
Total:
Adding IVR Virtual Domain
In a remote VSAN, the IVR application does not automatically add the virtual domain to the assigned
domain list. Some switches (for example, the Cisco SN5428) do not query the remote name server until
the remote domain appears in the assigned domain list in the fabric. In such cases, add the IVR virtual
domains in a specific VSAN(s) to the assigned domain list in that VSAN. When adding IVR domains,
all IVR virtual domains that are currently present in the fabric (and any virtual domain that is created in
the future) will appear in the assigned domain list for that VSAN.
Be sure to add IVR virtual domains if Cisco SN5428 or Cisco MDS 9020 switches exist in the VSAN.
Tip
Only add IVR domains in the edge VSANs and not in transit VSANs.
Tip
Cisco MDS 9000 Family Configuration Guide
18-16
Default-AFID
1 entry in default AFID table
AFID
1 entry in AFID table
Purpose
Configures the default AFID for all VSANs not
explicitly associated with an AFID.
Deletes the default AFID.
5
VSANS
10
1,2,5-8
Chapter 18
Configuring Inter-VSAN Routing
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Advertisement
Table of Contents
