Displaying Iscsi Initiators - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Configuring iSCSI
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Example 35-8 Displays Brief Information About the Specified iSCSI Session
switch# show iscsi session initiator 10.10.100.199 target VT1
Initiator 10.10.100.199
Initiator name iqn.1987-05.com.cisco.01.7e3183ae458a94b1cd6bc168cba09d2e
Session #1
Example 35-9 Displays Detailed Information About the Specified iSCSI Session
switch# show iscsi session initiator 10.10.100.199 target VT1 detail
Initiator 10.10.100.199 (oasis-qa)
Initiator name iqn.1987-05.com.cisco.01.7e3183ae458a94b1cd6bc168cba09d2e
Session #1 (index 3)

Displaying iSCSI Initiators

Use the show iscsi initiator command to display information about all initiators connected to an iSCSI
interface in the switch. The information can be filtered to display only the desired iSCSI initiator by
specifying the initiator name. Detailed output of the iscsi initiator can be obtained by specifying the
detail option. The iscsi-session (and optionally detail) parameter displays only iSCSI session
information. The fcp-session (and optionally detail) parameter displays only FCP session information.
The output includes static and dynamic initiators. See
Example 35-10 Displays Information About Connected iSCSI Initiators
switch# show iscsi initiator
iSCSI Node name is iqn.1987-05.com.cisco:02.3021b0f2fda0.avanti12-w2k
Cisco MDS 9000 Family Configuration Guide
35-34
Target VT1
VSAN 1, ISID 246b00000000, Status active, no reservation
Target VT1
VSAN 1, ISID 246b00000000, TSIH 384, Status active, no reservation
Type Normal, ExpCmdSN 39, MaxCmdSN 54, Barrier 0
MaxBurstSize 0, MaxConn 0, DataPDUInOrder No
DataSeqInOrder No, InitialR2T Yes, ImmediateData No
Registered LUN 0, Mapped LUN 0
Stats:
PDU: Command: 38, Response: 38
Bytes: TX: 8712, RX: 0
Number of connection: 1
Connection #1
Local IP address: 10.10.100.200, Peer IP address: 10.10.100.199
CID 0, State: LOGGED_IN
StatSN 62, ExpStatSN 0
MaxRecvDSLength 1024, our_MaxRecvDSLength 1392
CSG 3, NSG 3, min_pdu_size 48 (w/ data 48)
AuthMethod none, HeaderDigest None (len 0), DataDigest None (len 0)
Version Min: 2, Max: 2
FC target: Up, Reorder PDU: No, Marker send: No (int 0)
Received MaxRecvDSLen key: No
Initiator ip addr (s): 10.10.100.116
iSCSI alias name: AVANTI12-W2K
Node WWN is 22:01:00:05:30:00:10:e1 (configured)
Member of vsans: 1, 2, 10
Number of Virtual n_ports: 1
Virtual Port WWN is 22:04:00:05:30:00:10:e1 (configured)
Interface iSCSI 4/1, Portal group tag: 0x180
VSAN ID 1, FCID 0x6c0202
VSAN ID 2, FCID 0x6e0000
VSAN ID 10, FCID 0x790000
Chapter 35
Example 35-10 and Example
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Configuring iSCSI
35-11.