2-3-14. G4 CCU Parameters - Function 16
See the service manual for the Group 4 interface kit.
2-3-15. System Data List - Function 17
1.
Enter the service mode. See page 2-18.
2.
When the service mode menu is displayed, enter 17 at the ten-key pad.
Press Start to print the report. Pass the report on to Ricoh Technical Services.
3.
4.
Press Function if all service mode operations have been finished.
2-3-16. Hard Disk Shipping Position - Function 18
This is only for use when moving the machine to a new location. See section 1-9.
2-42