Ncu Parameters (Function 08) - Ricoh MV310 Service Manual

May 22nd, 1995
(To see the transmitted and received page
counters, press
To see the printer and scanner jam count-
ers, then press
Check the PM counter - press
Check the CTM counter - press
Check the OPU counter - press
4. To change the contents of a counter,
input the new value, then press
5. To finish:

4.1.9. NCU Parameters (Function 08)

1.
then immediately
2.
3.
4. Scroll through the parameters using
or . If you want to change a
value, enter the new value at the keypad,
then press
Example: Set NCU parameter 04 to 005.
5. To finish :
Note: Parameter CC is the Country Code, Parameter 01 is the Tx Level.
Refer to section 4.3 for full details on NCU parameters.
.
again.)
.
4-5
SERVICE TABLES AND PROCEDURES
SERVICE LEVEL FUNCTIONS
SCAN : 012345
PRINT : 012345
S.JAM: 000000
P.JAM: 000000
PM COUNTER: 001234
CTM COUNTER: 001234
OPU COUNTER:
FUNCTION KPAD/NEXT
SERVICE FUNCTIONS
0-NCU
2-DTMF
NCU
NO.04 = 005
001234
1-MODEM
3-DETCT
KPAD/<>