Table of Contents
Advertisement
Key Operator Tools
Note
The standby display reappears.
Deleting Specified Senders
General Procedure for Deleting Specified Senders
Use this procedure to delete Specified
Senders for the following features:
Reference
"Collate" ⇒ P.260.
"Authorized Reception" ⇒ P.262.
"Specified Tray" ⇒ P.265.
"Memory Lock" ⇒ P.276.
"TX/RX File In HD" ⇒ P.279.
"Backup File Transmission Settings"
⇒ P.284.
"Program Scan Area" ⇒ P.286.
Note
For how to delete Specified Send-
ers for the Forwarding function,
see P.273 "Deleting Specified Senders
(Forwarding)".
How to delete Specified Senders
The example below describes how to
delete Specified Senders for the Col-
9
late feature. The procedure for other
functions is identical except for steps
C and J.
A
Follow steps A–D on "Opening the
Initial Set Up Menu" ⇒ ⇒ P.260. to
bring up the "Initial Set Up"
menu.
B
Enter the code for "Collate" with
the number keys.
282
Note
If the item you require is not
shown, press [↑Prev.] or [↓Next]
until it is.
C
Press [Sender].
D
Enter the code for "Delete Send-
er" with the number keys.
E
Enter the 2-digit code of the Spec-
ified Sender you wish to register
with the number keys.
Note
If you make a mistake, press the
{Clear} key and try again.
F
Press [Yes].
Advertisement
Table of Contents
