Possibility To Install The Front Loader - Belarus 921.6 Operator's Manual

Then according to calculated loads, it is necessary to select tyre pressure (accord-
ing to subsection 3.2.8 " Selecting the optimal inner pressure in tyres depending on operation
conditions and load on the tractor axis, tyres operation rules ").
Calculating the tractor controllability criteria:
Т – load onto the tractor front axis, N;
f
k – tractor controllability criteria;
f
M – tractor operational weight (mass of the ballast weight is not taken into account
during calculation of the tractor operational weight М), kg.
ATTENTION: CONNECTION OF MACHINES TO THE TRACTOR SHALL NOT
LEAD TO EXCHEEDING THE ALLOWABLE AXIAL LOADS AND LOADS ONTO THE
TRACTOR TYRES!
ATTENTION: THE MINIMUM WEIGHT OF HITCHED MACHINES AND USED
BALLAST WEIGHTS SHALL BE ALWAYS BELOW SUCH VALUES, SO THE LOAD ON-
TO THE TRACTOR FRONT AXIS (WHICH IS PART OF MTA) IS ALWAYS AT LEAST
20% OF THE TRACTOR OPERATIONAL WEIGHT AND THE CONTROLLABILITY CRI-
TERIA IS NO LESS THAN 0.2!

4.13 Possibility to Install the Front Loader

ATTENTION: THE BELARUS-921.6 TRACTOR IS NOT INTENDED FOR INSTAL-
LATION OF ANY MOUNTED EQUIPMENT, INCLUDING MOUNTED FRONT LOADERS
(WHICH ARE NOT MOUNTED, SEMI-MOUNTED, TRAILER, SEMI-TRAILER MA-
CHINES) BY FASTENING THE SPECIAL COMPONENT UNITS FROM THE MOUNTED
EQUIPMENT SET TO THE TRACTOR MOUNTING OPENINGS!
, where:
131
921.6-0000010 OM