Scr System Operation Indication - Belarus 921.6 Operator's Manual

Table of Contents

Prior to filling the tank 1 (Figure 2.27.1) by AdBlue reagent, it is necessary to clean the

tank 1 filling neck 2 from dust and dirt.

ATTENTION: IF THE ENVIRONMENT TEMPERATURE IS BELOW MINUS 11 °С,

THE TANK FOR SCR SYSTEM FLUID SHALL BE FILLED BY AdBlue REAGENT ONLY TO

80% OF THE TANK FILLING VOLUME. OTHERWISE, FROZEN AdBlue REAGENT CAN

TEAR THE TANK!

ATTENTION: THE SCR SYSTEM PROVIDES FOR NORMAL OPERATIONAL CHAR-

ACTERISTICS AT THE ENVIRONMENT TEMPERATURE FROM -40 TO +40 ºС!

2.27.2 SCR System Operation Indication

To view the SCR system parameters, press any button of the monitor, except for the but-

ton 5(Figure 2.9.1), when the monitor is in the engine parameters display mode. Then pop-up

menu will appear on the monitor screen as shown in Figure 2.27.2 b).

а) the monitor is in the engine

mode

parameters display mode

Figure 2.27.2 – Entering the SCR system parameters viewing mode

When the third monitor button is pressed, which is located under the icon for SCR pa-

rameters menu entering, the monitor will switch into the SCR system parameters viewing

mode.

The monitor in the SCR system parameters viewing mode is shown inFigure2.27.3.

1, 2, 3, 4 – pop-up panel activation buttons; 5 – button for entering/exiting from the

mode of brightness, contrast adjustment and configuration menu; 6 – three sectional represen-

tation of the SCR parameters on screen.

Figure 2.27.3 – Monitor in the SCR system parameters viewing mode

When any of buttons 1, 2, 3, 4 (Figure 2.27.3) is pressed, the pop-up menu 6 (Figure

2.27.4) will appear on the monitor screen.Press the button 5 (Figure 2.27.3) to enter/exit from

the mode of brightness, contrast adjustment and configuration menu.

Monitor in the SCR system parameters viewing mode with activated pop-up panel and

buttons purpose when pop-up panel is activated are shown inFigure2.27.4.

b) the monitor is in the engine parameters display

with pop-up panel activated

921.6-0000010 OM

Icon for entering

into the SCR pa-

rameters menu

Pop-up menu

Table of Contents