Table of Contents
Advertisement
5.6.3 Jacks safe usage rules and places for their installation
Use jacks to lift the tractor, after lifting place the backing bars and rests under the
final reduction gears tubes, under the front wheels axis beam or under the tractor frame
basic elements.
Places for jacks' installation are marked by sign, which is shown in Figure 5.6.1.
To lift the tractor rear part, install jacks (or one jack) under the rear axle half-axis
tubes as shown in Figure 5.6.2.
Figure 5.6.2 – Jacks installation diagram while lifting the tractor rear part
To lift the tractor front part, install jacks (or one jack) under the front driving axle
beam tubes as shown in Figure 5.6.3.
Figure 5.6.3 – Jacks installation diagram while lifting the tractor front part
Figure 5.6.1 – Sign of the jack installation place
164
921.6-0000010 OM
Advertisement
Table of Contents
