Formation Of The Rear Wheels Spacing - Belarus 921.6 Operator's Manual

3.2.9 Formation of the Rear Wheels Spacing

If basic set tyres 420/70R24 are installed, change the rear wheels spacing by mov-
ing the hub with wheel on the half-axle, interchanging wheels from one side to another and
by changing position of the wheel disk in relation to the rim. Installation diagrams and
wheels spacing dimensions for tyres 420/70R24 (basic set) are shown in Table 3.2.4
Table 3.2.4 – Rear wheels spacing installation versions for tyres 420/70R24
Versions of the disk and rim
installation
Wheels
Disk offset
spacing K,
X, mm
mm
+90 1160-1210
-18 1326-1426
-68 1426-1526
90
921.6-0000010 OM
Mounting di-
mension from
the hub end Mounting method
face to the half- description
axle end face
H, mm
Main position.
The inner surface
of the disk is mat-
ing with the hub.
25...0
The disk is locat-
ed from the inner
side of the sup-
port.
The rim is rotated
by 180 degrees.
The disk is mat-
50...0
ing with the sup-
port inner sur-
face.
The rim is rotated
by 180 degrees.
The disk is mat-
50...0
ing with the sup-
port outer sur-
face.