Choice And Installation Of Front Loader; General Information - Belarus 1822.3 Operator's Manual

Table of Contents

Advertisement

5.15 Choice and installation of front loader

5.15.1 General information

When choosing, buying and mounting of mounted front loaders (hereinafter referred
to as loaders) pay attention to conditions specified in the present tractor operation manual
and in Table 5.14.
able 5.14
Name of indicator (characteristics)
Standard size of tractor "BELARUS-
1822.3/1822 .3/2022.3/2022 .3" wheel tires
to which installation of loader is possible
Tractor wheel tire pressure
Tractor wheel track, m, not less :
- for front wheels
- for front wheels
Tractor axle weight limit (with regard to trac-
tor and loader weights), kN, not more than:
- for front axle;
- for rear axle
Loader assembly weight, kg, not more than
Push force in cutting mode, kN, not more
than
Overloading protection while in cutting mode
Speed of tractor movement with loader in-
stalled, km/h, not more than:
- operation speed with load
- operation speed without load
- traveling speed
Tractor ballasting with loader installed (when
necessary)
Places of loaders fastening to a tractor:
- loader mounting frame
- loader push rods
Shift-time control
(testing parameters, in addition to STMS op-
erations, listed in tractor and loader operation
manual)
Connection of loader hydraulic system
Pressure-relief valve adjustment pressure (if
any) of loader hydraulic system, MPa
ATTENTION: FORK LOAD DEPENDS ON OVERHANG AND DESIGN OF
LOADER WORKING ATTACHMENTS, AND SPECIFICATIONS OF LIFTED LOAD!
IT IS FORBIDDEN TO USE WITH LOADER A TRACTOR HAVING NO CAB OR
CANOPY TENT, NO NOTWILLED MOVEMENT LIMITING SYSTEM (SEAT BELT), AND
ALSO IN CONFIGURATION WITH FRONT AND REAR TIRES OF IRREGULAR CON-
FIGURATION.
420/70R24 – front, 580/70R42 – rear (i.e. tires
of basic configuration or imported tires of the
same type)
Internal tire pressure of rear wheels set as pres-
sure for 30km/h speed
Rear wheels track is set at maximum permissi-
ble width
Automated protection in loader design
1. Ballast weight – on rear lift linkage.
2. Water solution in rear tires
Front beam, longeron, clutch case
Semi-axle tubes, GB and rear axle casings
1. Tightness of fasteners of loader mounting
frame and tractor wheels.
2. Tractor tire pressure
229
https://tractormanualz.com/
2022.3-0000010 OM
Indicator (characteristics) value
Not less than 1890±20
50
85
1760
27
6
12
25
Tractor hydraulic outputs
20
-2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1822b.32022.32022b.3

Table of Contents