Belarus 921.6 Operator's Manual page 64

Power supply harness
Instruments
panel harness
Harness for EE in
roof
a) connection of the electric equipment harness to BKA-7.3722-02
Power supply harness
Instruments
panel harness
Harness for EE
in roof
b) connection of the electric equipment harness to BK-1-02
Figure 2.22.5 – Diagram of the electric equipment harness connection to the SU
In addition to the fuses, which are located in the switching unit and shown in Fig-
ure2.22.3, the BELARUS-921.6 tractor network is equipped with fuses for the electric
equipment power supply circuits. These fuses are located in following areas of the engine
compartment:
- in area of the coarse fuel filter;
- in area of the accumulator battery.
To gain access to the fuses unit 3 (Figure 2.22.6), which is located in the area of
coarse fuel filter 2, remove the left side panel of the tractor.
Figure 2.22.6 – The fuses unit location in the engine compartment
Orange wire to the
starter winding
Grounding wire
Orange wire to the
starter winding
Grounding wire
1 – engine; 2 – coarse fuel filter; 3 – fuses unit.
Green wire to the
starter winding
Harness for EE on handrail
Green wire to the
starter winding
Harness for EE in cab
64
921.6-0000010 OM
Instruments
panel harness
Harness for EE in cab
Harness for EE on handrail
Instruments
panel harness