Possibility Of Front Loader Installation; General Information - Belarus 922.6 Operator's Manual

4.13 Possibility of front loader installation

4.13.1 General information

When choosing, buying and installing mounted front loaders (further in the text –
loaders), it is necessary to pay attention to the conditions specified in the present tractor
operation manual and in table 4.13.1.
Table 4.13.1 – The rules of tractor with loader use
Name of indicator (characteristics)
Standard size of tractor "BELARUS-922.6"
wheel tires on which loader installation is
possible
Tire pressure in tractor wheels
Tractor wheel track, m, not less :
- for front wheels
- for rear wheels
Permissible load on tractor axle (considering
tractor and loader weights), kN, not more
than:
- for front axle;
- for rear axle
Tractor weight with a loader installed, kg, not
more than
Push force in cutting mode, kN, not more
than
Overloading protection when in cutting mode
Speed of tractor movement with a loader in-
stalled, km/h, not more than:
- operation speed with load
- operation speed without load
- transport speed
Tractor ballasting with a loader installed
(when necessary)
Places of loader fastening to the tractor:
Shift-time control
(testing parameters, in addition to STMS op-
erations listed in the tractor and loader op-
eration manuals)
Connection of the loader hydraulic system
Recommended pressure of safety valve ad-
justment (when self-supporting hydraulic dis-
tribution valve is available in the loader kit) of
the loader hydraulic system, MPa, not more
than
ATTENTION: FORK LOAD DEPENDS ON THE OVERHANG AND DESIGN OF THE
LOADER OPERATING PARTS, AND SPECIFICATIONS OF THE LIFTED LOAD!
IT IS FORBIDDEN TO USE WITH A LOADER A TRACTOR WITHOUT A CAB OR A CAN-
OPY TENT; WITHOUT NOT-WILLED MOVEMENT LIMITING SYSTEM (SEAT BELTS),
Indicator (characteristics) value
360/70R24 – front, 18.4R34 – rear
(i. е. tires of basic configuration or imported tires
of the same type)
Internal tire pressure of rear wheels shall be set
as pressure for 30km/h speed
Automated protection in loader design
1. Ballast weight – on rear lift linkage.
2. Water solution in rear tires.
Front beam, side members, clutch coupling
case, semi-axle tubes
1. Tightness of fasteners of loader mounting
frame and tractor wheels
2. Tire pressure in tractor wheels
Tractor hydraulic outlets
122
922.6-0000010 OM
1800
2100
37,0
53,0
7000
18,0
6
12
20
17,0