Possibility Of Front Loader Installation; General Information - Belarus 1523.5 Operator's Manual

4.13 Possibility of front loader installation

4.13.1 General information

When choosing, buying and installing mounted front loaders (further in the text – loaders),
it is necessary to pay attention to the conditions specified in the present tractor operation
manual and in table 4.10.
Table 4.10 – The rules of tractor with loader use
Name of indicator (characteristics)
Standard size of tractor "BELARUS-1523.5"
wheel tires on which loader installation is
possible
Tire pressure in tractor wheels
Tractor wheel track, m, not less :
- for front wheels
- for rear wheels
Permissible load on tractor axle (considering
tractor and loader weights), kN, not more
than:
- for front axle;
- for rear axle
Tractor weight with a loader installed, kg, not
more than
Push force in cutting mode, kN, not more
than
Overloading protection when in cutting mode
Speed of tractor movement with a loader in-
stalled, km/h, not more than:
- operation speed with load
- operation speed without load
- transport speed
Tractor ballasting with a loader installed
(when necessary)
Places of loader fastening to the tractor:
- loader mounting frame
- loader push rods
Shift-time control
(testing parameters, in addition to STMS op-
erations listed in the tractor and loader op-
eration manuals)
Connection of the loader hydraulic system
Recommended pressure of safety valve ad-
justment (when self-supporting hydraulic dis-
tribution valve is available in the loader kit) of
the loader hydraulic system, MPa, not more
than
ATTENTION: FORK LOAD DEPENDS ON THE OVERHANG AND DESIGN OF THE
LOADER OPERATING PARTS, AND SPECIFICATIONS OF THE LIFTED LOAD!
Indicator (characteristics) value
420/70R24 – front, 520/70R38 – rear
(i. е. tires of basic configuration or imported tires
of the same type)
Internal tire pressure of rear wheels shall be set
as pressure for 30km/h speed
1800
2150
40,0
60,0
9000
27,0
Automated protection in loader design
6
12
20
1. Ballast weight – on rear lift linkage.
2. Water solution in rear tires.
Front beam, side members, clutch coupling
case
Semi-axle tubes, clutch coupling and rear axle
cases
1. Tightness of fasteners of loader mounting
frame and tractor wheels
2. Tire pressure in tractor wheels
Tractor hydraulic outlets
17,0
129
1523.5-0000010 OM