Table of Contents
Advertisement
Firmware configuration
similar devices. See
Manager to manage and configure your IX40 device.
The local web interface. See
l
using the local web interface to manage and configure your IX40 device.
Note
Changes made to the device's configuration by using the local web interface will not
be automatically reflected in Digi Remote Manager. You must manually refresh Remote
Manager for the changes to be displayed.
Web-based instructions in this guide are applicable to both the Remote Manager and the local
web interface.
n
Command line.
A robust command line allows you to perform all configuration and management tasks from
within a command shell. Both the Remote Manager and the local web interface also have the
option to open a terminal emulator for executing commands on your IX40 device. See
the command line
configure your IX40 device.
In this guide, task topics show how to perform tasks:
É
Web
Shows how to perform a task by using the local web interface.
Command line
Shows how to perform a task by using the command line interface.
Using Digi Remote Manager
By default, your IX40 device is configured to use Digi Remote Manager as its central management
server. Devices must be registered with Remote Manager using one of the following options:
As part of the getting started process. See the
n
If you have not registered the device already, you can do so using the Device ID, MACaddress,
n
IMEI, or your Remote Manager login credentials. See
For information about configuring central management for your IX40 device, see
management.
Using the local web interface
To connect to the IX40 local Web UI:
1. Use an Ethernet cable to connect the IX40's ETH2 port to a laptop or PC.
2. Open a browser and go to 192.168.2.1.
3. Log into the device using a configured user name and password.
The default user name is admin and the default password is the unique password printed on
the label packaged with your device.
After logging in, the local web admin dashboard is displayed.
The dashboard shows the current state of the device.
IX40 User Guide
Central management
Using the local web interface
for more information about using the command line to manage and
Using Digi Remote Manager
for more information about using the Remote
for more information about
Quick Start Guide
for information.
Add a device to Remote
Using
Manager.
Central
52
Advertisement
Table of Contents
