Configure The Speed Of Your Ethernet Ports - Digi IX40 User Manual

System administration
n Gateway: 192.168.210.1
2. Connect the PC's Ethernet port to the ETH1 Ethernet port on your IX40 device.
3. Open a telnet session and connect to the IX40 device at the IP address of 192.168.210.1.
4. Log into the device:
n Username: admin
n Password: The default unique password for your device is printed on the device label.
5. At the shell prompt, type:
# rm /etc/config/.nocrypt
# flatfsd -i
This will re-enable encryption and leave the device at its factory default setting.

Configure the speed of your Ethernet ports

You can configure the speed of your IX40 device's Ethernet ports.
É
Web
IX40 User Guide
Configure the speed of your Ethernet ports
886