Table of Contents
Advertisement
Services
6. (Optional) Set the port number for this service.
The default setting of 443 normally should not be changed.
(config)> service web_admin port 444
(config)>
7. (Optional) Set the minimum TLS version that can be used by client to negotiate the HTTPS
session:
(config)> service web_admin legacy_encryption value
(config)>
where value is one of:
n
TLS-1_1
n
TLS-1_2
n
TLS-1_3
The default is TLS-1_2.
8. (Optional) Disable legacy port redirection.
Legacy port redirection is used to redirect client HTTP requests to the HTTPS service. Legacy
port redirection is enabled by default, and normally these settings should not be changed.
To disable legacy port redirection:
(config)> service web_admin legacy enable false
(config)>
9. Save the configuration and apply the change
(config)> save
Configuration saved.
>
10. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
IX40 User Guide
Configure the web administration service
521
Advertisement
Table of Contents
