Digi IX40 User Manual page 553

Services
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the show wan-bonding
> show wan-bonding
WAN Bonding Status
------------------
Status
Server Address
Tunnel Username
Tunnel Address
WAN Bonded Interfaces
---------------------
Channel #0:
Channel #1:
>
3. Use the show wan-bonding
> show wan-bonding verbose
WAN Bonding Status
------------------
Tunnel Info
----------------
Status
Endpoint
Network
Total Bytes
Channel Online 2
Channel #0 (eth1)
----------------
Enabled
Status
Uptime
Latency
In Transit
Last Error
Current (1sec) RX 4 sent, 0 lost; TX 5 sent, 0 lost, 4 acked
Total
Channel #1 (wwan0.1)
----------------
Enabled
Status
Uptime
IX40 User Guide
command at the system prompt:
: Connected
: 133.183.203.237
: test1
: 146.78.40.226
: eth1 (eth1)
: modem (wwan0.1)
command to view additional status and statistics:
connected
133.183.203.237:443 (#0)
146.78.40.226/255.255.255.0 gw 146.78.40.1
0 in, 427 out
Yes
"connected"
5 sec
41ms (current) / 41ms (idle)
0
null
RX 16 sent, 0 lost; TX 18 sent, 0 lost, 18 acked
Yes
"connected"
5 sec
WAN bonding
553