Table of Contents
Advertisement
Containers
Command line
Show status of all containers
Use the
show containers
on the system:
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the prompt, type:
> show containers
Container Configured Enabled State
--------- ---------- ------- -----------------
mytest1 True
test_lxc True
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show status of a specific container
Use the
show containers container name
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the prompt, type:
> show containers container test_lxc
Container Configured Enabled State
--------- ---------- ------- -----------------
IX40 User Guide
command with no additional arguments to show the status of all containers
enabled STOPPED
enabled RUNNING PID 19327
command to show the status of the specified container:
View the status of containers
828
Advertisement
Table of Contents
