Table of Contents
Advertisement
Virtual Private Networks (VPN)
f. Click g to add a network.
g. For Interface, select the interface created above.
h. For Tunnel, select the IP tunnel created above.
i. Click to expand Next hop servers.
j. Click g to add a server.
k. For NBMA address, type the hostname or IP address of the node that will be the next hop
server.
6. To enable redirection of packets between spokes, configure OSPF routing:
a. Click Network > Routes > Routing services > OSPF.
b. Enable OSPF.
c. For ABR behavior, choose the Area Border Router for the network.
d. For Reference bandwidth, type the link bandwidth.
e. Enable the Opaque-LSA standard.
f. Enable the RFC1583 standard.
7. Configure the overlay connection:
a. Click Network > Routing services > BGP.
b. Enable BGP.
c. For AS number, type the autonomous system number for this device.
d. For Best path criteria, select Multipath.
e. Click to expand Neighbours.
f. Click g to add a neighbour.
IX40 User Guide
Dynamic Multipoint VPN (DMVPN)
478
Advertisement
Table of Contents
