Table of Contents
Advertisement
File system
4. Browse to the location of the file on your local machine. Select the file and click Open to
upload the file.
Download files
Log into the IX40 WebUI as a user with full Admin access rights.
1. On the menu, click System. Under Administration, click File System.
The File System page appears.
2. Highlight the directory to which the file will be uploaded and click d to open the directory.
3. Highlight the appropriate file and click (download).
Upload and download files by using the Secure Copy command
Copy a file from a remote host to the IX40 device
To copy a file from a remote host to the IX40 device, use the
> scp host hostname-or-ip user username remote remote-path local local-path to local
where:
hostname-or-ip is the hostname or IP address of the remote host.
n
username is the name of the user on the remote host.
n
remote-path is the path and filename of the file on the remote host that will be copied to the
n
IX40 device.
local-path is the location on the IX40 device where the copied file will be placed.
n
For example:
To copy firmware from a remote host with an IP address of 192.168.4.1 to the /etc/config directory on
the IX40 device, issue the following command:
> scp host 192.168.4.1 user admin remote /home/admin/bin/IX40-23.12.1.56.bin local /etc/config/scripts to
local
admin@192.168.4.1's password: adminpwd
IX40 User Guide
Upload and download files
scp
command as follows:
916
Advertisement
Table of Contents
