Digi IX40 User Manual page 873

System administration
3. Expand System.
4. Click to enable FIPs.
5. Click Apply to save the configuration and apply the change.
6. Click System > Reboot to reboot the device.
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Enable FIPS:
(config)> system fips true
>
3. Save the change:
(config)> save
>
4. Reboot the device:
> reboot
>
IX40 User Guide
Enable FIPSmode
873