Delete A Lan - Digi IX40 User Manual

Interfaces
> show network interface eth2
lan1 Interface Status
---------------------
Device
Zone
IPv4 Status
IPv4 Type
IPv4 Address(es) : 192.168.2.1/24
IPv4 Gateway
IPv4 MTU
IPv4 Metric
IPv4 Weight
IPv4 DNS Server(s) :
IPv6 Status
IPv6 Type
IPv6 Address(es) : fd00:2704::1/48
IPv6 Gateway
IPv6 MTU
IPv6 Metric
IPv6 Weight
IPv6 DNS Server(s) :
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Delete a LAN

Follow this procedure to delete any LANs that have been added to the system. You cannot delete the
preconfigured LAN, LAN1.
É
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
IX40 User Guide
: eth2
: internal
: up
: static
:
: 1500
: 5
: 10
: up
: prefix
:
: 1500
: 5
: 10
Use Digi Remote Manager to view and manage your
Local Area Networks (LANs)
191