Table of Contents
Advertisement
Routing
Your IX40 device supports a number of Dynamic DNS providers as well as the ability to provide a
custom provider that is not included on the list of providers.
Configure dynamic DNS
This section describes how to cofigure dynamic DNS on a IX40 device.
Required configuration items
n
Add a new Dynamic DNS service.
n
The interface that has its IP address registered with the Dynamic DNS provider.
n
The name of a Dynamic DNS provider.
n
The domain name that is linked to the interface's IP address.
n
The username and password to authenticate with the Dynamic DNS provider.
Additional configuration items
n
If the Dynamic DNS service provider is set to custom, identify the URL that should be used to
update the IP address with the Dynamic DNS provider.
n
The amount of time to wait to check if the interface's IP address needs to be updated.
n
The amount of time to wait to force an update of the interface's IP address.
n
The amount of time to wait for an IP address update to succeed before retrying the update.
n
The number of times to retry a failed IP address update.
É
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Dynamic DNS.
IX40 User Guide
Use Digi Remote Manager to view and manage your
Dynamic DNS
326
Advertisement
Table of Contents
