Table of Contents
Advertisement
Services
5. For Mode, selected either:
n
Active-backup: Transmits data on only one of the bonded devices at a time. When the
active device fails, the next available device in the list is chosen. This mode provides for
fault tolerance.
n
Round-robin: Alternates between bonded devices to provide load balancing as well as
fault tolerance.
6. Click to expand Devices.
7. Add Ethernet devices:
a. For Add device, click g .
b. For Device, select an Ethernet device to participate in the bond pool.
c. Repeat for each appropriate Ethernet device.
8. Create a new network interface that is linked to the Ethernet bond:
a. Click Network > Interface.
b. For Add Interface, type a name for the interface and click g .
c. For Device, select the Ethernet bond created above:
IX40 User Guide
Ethernet network bonding
621
Advertisement
Table of Contents
