What's New In Ix40 Version 23.12 - Digi IX40 User Manual

What's new in IX40 version 23.12

Initial release of the IX40 device.
Release of Digi IX40 firmware version 23.12:
Updated Active SIM slot definition:
n
FIPS feature is available for all DAL devices.
n
Link OSPF routes through a DMVPN tunnel and allow for redirection of packets between
n
spokes. Configure a DMVPN
n Support for Rapid Spanning Tree Protocol (RSTP).
n New setting which allows device to initiate a Realport connection to a remote server.
the RealPort
n New After option for the SIM preference schedule.
n New WAN Bonding proxy and Client devices options.
configure WAN bonding on multiple devices
n New BOOTP dynamic allocation option.
n Renamed SureLink Attempts configuration setting to Surelink test failures to better indicate
what this setting does.
n New Telnet Login setting to control whether a user must supply credentials when opening a
Telnet connection to access a serial port on a service.
n New Advanced watchdog Modem check and recovery setting to control whether watchdog
will monitor initialization of the IX40 cellular modem.
IX40 User Guide
Configure cellular
spoke.
service.
modem.
Enable FIPS mode
Configure a bridge.
Configure cellular
Use Digi Remote Manager to enable and
or Configure WAN bonding on your local
Configure a DHCP server.
Configure serial
Configure the system
Configure
modem.
device.
authentication.
watchdog.
17