Table of Contents
Advertisement
Applications
Log into the IX40 WebUI as a user with full Admin access rights.
a. On the menu, click System. Under Administration, click File System.
The File System page appears.
b. Highlight the scripts directory and click d to open the directory.
c. Click “ (upload).
d. Browse to the location of the script on your local machine. Select the file and click Open
to upload the file.
The uploaded file is uploaded to the /etc/config/scripts directory.
Command line
a. Select the device in Remote Manager and click Actions > Open Console, or log into the
IX40 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
b. At the command line, use the
IX40 device:
> scp host hostname-or-ip user username remote remote-path local local-path to local
where:
n
n
n
n
For example:
To upload a script from a remote host with an IP address of 192.168.4.1 to the
/etc/config/scripts directory on the IX40 device, issue the following command:
IX40 User Guide
scp
hostname-or-ip is the hostname or IP address of the remote host.
username is the name of the user on the remote host.
remote-path is the path and filename of the file on the remote host that will be
copied to the IX40 device.
local-path is the location on the IX40 device where the copied file will be placed.
Run a Python application at the shell prompt
command to upload the Python application script to the
702
Advertisement
Table of Contents
