Digi IX40 User Manual page 283

Serial port
Item
Digi Remote
2
Manager
Specify a
3
device
List of
4
discovered
devices
Open
5
Configure
6
device for
Realport
Configure
7
this PC for
RealPort
RealPort
8
Devices
Refresh
9
Open Device
10
Manager
Manage the RealPort configured Digi device list
After you have enabled and configured RealPort on at least one Digi device, a list of configured
devices displays at the bottom of the Digi Navigator. You can refresh the list and easily access the
COM port configuration on your computer.
IX40 User Guide
Configure RealPort mode using the Digi Navigator
Description
autodiscovery with Digi Navigator.
Default IP Filters: These specific IP addresses can be used to
n
discover a Digi device that is directly connected to a computer or
connected to a network with no DHCP server. Not applicable for
devices that do not support autodiscovery with Digi Navigator.
192.168.210.1: A set up address that is available in the OS.
l
See Assign a generic IP address to the
169.254.100.100: An auto-IP address available in the OS. See
l
Use the autodiscovery protocol to discover a
Click Digi Remote Manager to launch Digi Remote Manager. See
Access Digi Remote Manager from the Digi
Expand the Specify a device section to enter the IP address of a Digi
device. See Specify the IP address to discover a Digi
Configure RealPort on a Digi device from the Digi
A list of the Digi devices discovered by the Digi Navigator displays.
Expand a device to view additional information. See
device discovery process. Not applicable for devices that do not support
autodiscovery with Digi Navigator.
Click Open to access the web UI for the Digi device. See
UI from the Digi Navigator.
Click Configure device for Realport to configure the Digi device to use
RealPort. See Configure RealPort on a Digi device from the Digi
Navigator.
Click Configure this PC for RealPort to configure your computer to use
RealPort. See Configure RealPort on a Digi device from the Digi
Navigator.
Click RealPort Devices at the bottom of the screen to display a list of
Digi devices that are configured to use RealPort. See
on a Digi device from the Digi
Click Refresh to update the list of the Digi devices that have RealPort
enabled and configured.
Click Open Device Manager to open the Windows Properties dialog on
your computer to access the configured COM ports. The number of
COM ports configured for RealPort matches the number of serial ports
on the device.
device.
Navigator.
device. See
Navigator.
Digi Navigator
Configure RealPort
Navigator.
device.
Access the web
283