Table of Contents
Advertisement
User authentication
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Authentication > Groups.
4. For Add, type a name for the group and click g .
The group configuration window is displayed.
5. Click the following options, as appropriate, to enable or disable access rights for each:
Admin access
n
For groups assigned Admin access, you can also determine whether the Access level
should be Full access or Read-only access.
where value is either:
Full access full: provides users of this group with the ability to manage the IX40
l
device by using the WebUI or the Admin CLI.
Read-only access read-only: provides users of this group with read-only access to
l
the WebUI and Admin CLI.
The default is Full access full.
IX40 User Guide
Authentication groups
723
Advertisement
Table of Contents
