Digi IX40 User Manual page 123

Interfaces
É
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Configure active recovery on ETH1:
a. Click Network > Interface > ETH1 > SureLink.
b. For Test interval, type 10s.
c. Click to expand Tests.
d. Disable the default DNS test:
i. Click to expand the default DNS configured test.
ii. Click to toggle off Enable.
IX40 User Guide
Use Digi Remote Manager to view and manage your
Wide Area Networks (WANs)
123