Table of Contents
Advertisement
Services
hosting and configuration services.
Digi Professional Services
n
You can also setup a trial server at
Required configuration items
n
Enable the WAN bonding service.
n
Hostname of the external server hosting the WAN bonding service.
n
The port on the external hosting server that will be used for the WAN bonding service.
n
The username and password to authenticate with the hosting service.
n
WAN interfaces that will be bonded.
n
The password used to authenticate with the web interface.
Additional configuration items
n
The firewall zone for the new bonded interface, if other than External.
É
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > SD-WAN > WAN bonding.
4. Toggle on Enable.
Note
The WAN bonding service must be enabled for this device in Digi Remote Manager.
Contact your Digi sales representative for information.
IX40 User Guide
can setup, manage, and maintain your WAN bonding servers.
the Bondix website
for testing purposes.
Use Digi Remote Manager to view and manage your
WAN bonding
548
Advertisement
Table of Contents
