Digi IX40 User Manual page 28

About the Digi IX40
Number Item
1 Port
LEDs
2 Status
LEDs
Port LEDs
The amber and green-colored LEDs indicate that the Ethernet network interface is up and there is
activity.
Amber LED
n Off: No Ethernet link detected.
n Solid amber: 10/100 Mbps link detected.
Green LED
n Off: No Ethernet link detected.
n Solid green: Ethernet link detected.
n Blinking green: Indicates Ethernet traffic.
Status LEDs
PWR
PWR LED is on when power is applied.
Off
No power.
Solid green
Device has power but is not connected to the internet.
Flashing green/cyan
Device has power and is in the process of connecting to the internet.
Solid cyan
Device has power and is connected to the internet.
INT
Indicates which interface is connected.
IX40 User Guide
Description
The LEDs for each port indicate Ethernet link and activity.
See Port LEDs.
The Status LEDs are located on the top front panel. The number of LEDs
varies by model. During bootup, these LEDs light up in sequence to indicate
boot progress. See Status
Digi IX40 external hardware
LEDs.
28