Table of Contents
Advertisement
Digital Input/Output and Analog Input
7. Save the configuration and apply the change
(config)> save
Configuration saved.
>
8. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show digital I/O and analog input status and statistics
É
Web
1. Log into the IX40 WebUI as a user with full Admin access rights.
2. From the menu, click Status.
3. Under Connections, click I/O.
The I/O Status page is displayed:
From the I/O Status page, you can change the output state of a digital I/O port. See
output state of digital I/O ports
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. To show the status of all digital I/Os:
> show dio
Label Port Direction Output Input Pulse
----- ---- --------- ------ ----- -----
dio1 input
>
3. To show the status and statistics of an individual digital I/O:
> show dio dio1
Port
: dio1
Label
:
Direction : input
Input
: on
Output
: -
Pulse
: -
>
IX40 User Guide
Show digital I/Oand analog input status and statistics
for more information.
-
on
-
Change the
845
Advertisement
Table of Contents
