Digi IX40 User Manual page 812

Firewall
To verify the implementation:
É
Web
This procedure assumes you have already configured web filtering to use either Cisco Umbrella or the
Cisco open DNS servers.
n See Configure web filtering with Cisco Umbrella
with Cisco Umbrella.
n See Configure web filtering with manual DNS servers
filtering to use Cisco open DNS servers.
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Disable web filtering:
a. Click Firewall > Web filtering service.
b. Click Enable web filtering to disable.
c. Click Apply to save the configuration and apply the change.
4. From a new tab in your browser, attempt to connect to the Cisco test
URL http://www.internetbadguys.com.
The connection should be successful.
5. Return to the IX40 WebUI and enable web filtering:
a. Click Firewall > Web filtering service.
b. Click Enable web filtering to enable.
c. Click Apply to save the configuration and apply the change.
IX40 User Guide
for information about configuring web filtering
for information about configuring web
Use Digi Remote Manager to view and manage your
Web filtering
812