Digi IX40 User Manual page 180

Interfaces
(config network interface my_lan)> ipv4 weight num
(config network interface my_lan)>
iii. Set the management priority. This determines which interface will have priority for
central management activity. The interface with the highest number will be used.
(config network interface my_lan)> ipv4 mgmt num
(config network interface my_lan)>
iv. Set the MTU:
(config network interface my_lan)> ipv4 mtu num
(config network interface my_lan)>
c. Enable the DHCP server:
(config network interface my_lan)> ipv4 dhcp_server enable true
See DHCP servers
7. (Optional) Configure IPv6 settings:
a. Enable IPv6 support:
(config network interface my_lan)> ipv6 enable true
(config network interface my_lan)>
b. Set the IPv6 type to DHCP:
(config network interface my_lan)> ipv6 type dhcpv6
(config network interface my_lan)>
c. Generally, the default settings for IPv6 support are sufficient. You can view the default IPv6
settings by using the question mark (?):
(config network interface my_lan)> ipv6 ?
IPv6
Parameters
-------------------------------------------------------------------------------
enable
metric
mgmt
mtu
prefix_id
prefix_length
type
weight
Additional Configuration
-------------------------------------------------------------------------------
connection_monitor
dhcpv6_server
IX40 User Guide
for information about configuring the DHCP server.
Current Value
true Enable
0 Metric
0 Management priority
1500 MTU
1 Prefix ID
48 Prefix length
prefix_delegation Type
10 Weight
Active recovery
DHCPv6 server
Local Area Networks (LANs)
180