Routing
11. Save the configuration and apply the change
(config)> save
Configuration saved.
>
12. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Example: Dual WAN policy-based routing
This example routes traffic to a specific IP address to go through the cellular WWAN interface, while all
other traffic uses the Ethernet WAN interface.
É
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Routes > Policy-based routing.
4. Click the g to add a new route policy.
5. For Label, type Route through cellular.
IX40 User Guide
Use Digi Remote Manager to view and manage your
IP routing
311