Digi IX40 User Manual page 855

System administration
where:
n hostname-or-ip is the hostname or IP address of the remote host.
n username is the name of the user on the remote host.
n remote-path is the path and filename of the file on the remote host that will be copied
to the IX40 device.
n local-path is the location on the IX40 device where the copied file will be placed.
For example:
> scp host 192.168.4.1 user admin remote /home/admin/bin/IX40-23.12.1.56.bin local /tmp/ to local
admin@192.168.4.1's password: adminpwd
IX40-23.12.1.56.bin
>
4. Verify that the firmware file has been successfully uploaded to the device:
> ls /tmp
-rw-r--r-- 1 root
-rw-r--r-- 1 root
...
>
5. Update the firmware by entering the
and file name to the firmware file:
> system firmware update file /tmp/IX40-23.12.1.56.bin
36632K
netflash: got "/tmp/IX40-23.12.1.56.bin", length=37511229
netflash: authentication successful
netflash: programming FLASH device /dev/flash/image
36633K 100%
Firmware update completed, reboot device
>
6. Reboot the device to run the new firmware image using the
> reboot
Rebooting system
>
7. Once the device has rebooted, log into the IX40's command line as a user with Admin access
and verify the running firmware version by entering the
> show system
Hostname
FW Version
MAC
Model
Current Time
Uptime
IX40 User Guide
100% 36MB 11.1MB/s
root 37511229 May 16 20:10 IX40-23.12.1.56.bin
root 2580 May 16 16:44 blank.json
system firmware update
: IX40
: 23.12.1.56
: 0040FF800120
: Digi IX40
: Thu, Jan 11, 2024 12:10:00 +0000
: 42 seconds (42s)
Update system firmware
00:03
command, specifying the path
reboot command.
show system command.
855