Table of Contents
Advertisement
Services
n
Include debug messages in the system log.
n
Whether to allow anonymous clients.
n
Whether to allow clients that have no client ID to connect.
n
Whether replace the client's ID with its username.
É
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > MQTT broker.
4. Click Enable.
5. (Optional) For Port, type the port number for the MQTT broker to listen for incoming
connections. The default is 1883.
6. (Optional) Click to expand Access control list to restrict access to the MQTT broker:
n
To limit access to specified IPv4 addresses and networks:
a. Click IPv4 Addresses.
b. For Add Address, click g .
c. For Address, enter the IPv4 address or network that can access the device's iperf
d. Click g again to list additional IP addresses or networks.
To limit access to specified IPv6 addresses and networks:
n
a. Click IPv6 Addresses.
b. For Add Address, click g .
IX40 User Guide
service. Allowed values are:
A single IP address or host name.
l
A network designation in CIDR notation, for example, 192.168.1.0/24.
l
any: No limit to IPv4 addresses that can access the iperf service.
l
Use Digi Remote Manager to view and manage your
Use the MQTT broker service
628
Advertisement
Table of Contents
