Table of Contents
Advertisement
Interfaces
6. Click to expand Default Slice Information.
a. Click Enable to enable the default slice for this modem.
b. For Slice Service Type (SST), select the type of slice to be used.
Allowed values are:
n
n
n
The default is eMBB.
c. (Optional) For Slice Differentator (SD), type additional information that supplements the
SST to differentiate among multiple network slices of the same SST.
7. Click Apply to save the configuration and apply the change.
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Modem configurations are enabled by default. To disable:
(config)> network modem modem enable false
(config)>
4. Set the SIM slot that should be used by the modem:
(config)> network modem modem sim_slot value
(config)>
where value is one of the following:
n
any: Uses either SIM slot.
n
1: Uses the first SIM slot.
n
2. Uses the second SIM slot.
The default is any.
5. If sim_slot is set to any, set the SIM slot that should be considered the preferred slot for this
modem:
(config)> network modem modem sim_slot_preference value
(config)>
where value is one of the following:
IX40 User Guide
eMBB: Enhanced Mobile Broadband.
URLLC: Ultra-Reliable Low-Latency Communications.
MIoT: Massive Internet of Things.
Wide Area Networks (WANs)
128
Advertisement
Table of Contents
