Step 4: Sign Up For Digi Remote Manager; Step 5: Access The Ix14 Local Web Interface - Digi IX14 User Manual

Digi IX14 Quick start
c. Use an Ethernet cable to connect your IX14 WAN/ETH1 port to your PC.
d. Power on the IX14 by connecting a DC power source. See
power supply requirements.
e. Power LED is solid blue as the device prepares to boot up.
f. Power LED flashes blue as the device boots up.
Power LED is solid blue when the IX14 is ready.

Step 4: Sign up for Digi Remote Manager

Here's how to sign up with Digi Remote Manager:
a. Click Sign Up
b. You'll receive an email with login instructions.
c. Click on the link in the email to log into Digi Remote Manager.

Step 5: Access the IX14 local web interface

a. If you have not already done so, use an Ethernet cable to connect your IX14 WAN/ETH1 port to
your PC.
b. Open a browser and go to 192.168.210.1.
c. Log into the IX14:
User name: Use the default user name: admin. If your device was manufactured prior
to the release of firmware version 19.11.x, the default user name may be root.
Password: Use the unique password printed on the bottom label of the device (or the
printed label included in the package).
The IX14 local WebUI main menu appears.
IX14 User Guide
to create a new account.
Step 4: Sign up for Digi Remote Manager
IX14 power supply requirements for
22