Table of Contents
Advertisement
Monitoring
É
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Monitoring > NetFlow probe.
4. Enable NetFlow probe.
5. Protocol version: Select the Protocol version. Available options are:
NetFlow v5— Supports IPv4 only.
n
NetFlow v9— Supports IPv4 and IPv6.
n
NetFlow v10 (IPFIX)— Supports both IPv4 and IPv6 and includes IP Flow Information
n
Export (IPFIX).
The default is NetFlow v10 (IPFIX).
6. Enable Flow sampler by selecting a sampling technique. Flow sampling can reduce flow
processing and transmission overhead by providing a representative subset of all flows.
Available options are:
None— No flow sampling method is used. Each flow is accounted.
n
Deterministic— Selects every nth flow, where n is the value of Flow sampler
n
population.
IX40 User Guide
Use Digi Remote Manager to view and manage your
Configure NetFlow Probe
905
Advertisement
Table of Contents
