Download Captured Data To Your Pc - Digi IX40 User Manual

Diagnostics
where:
n filename is the name of the file that the captured data will be saved to.
Determine filenames already in use:
Use the tab autocomplete feature to determine filenames that are currently in use:
> analyzer save name <tab>
test1_analyzer_capture
> analyzer save name
n path is the path and filename to save captured traffic to. If a relative path is provided,
/etc/config/analyzer will be used as the root directory for the path and file.
To transfer the file to your PC, see

Download captured data to your PC

After saving captured data to a file (see
from the WebUI or from the command line by using the
É
Web
Log into the IX40 WebUI as a user with full Admin access rights.
1. On the menu, click System. Under Administration, click File System.
The File System page appears.
2. Highlight the analyzer directory and click d to open the directory.
3. Select the saved analyzer report you want to download and click (download).
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
IX40 User Guide
test2_analyzer_capture
Download captured data to your
Save captured data traffic to a
scp (secure copy file) command.
Analyze network traffic
PC.
file), you can download the file
951