Interfaces
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces > ETH1.
4. For Zone, select Internal.
5. Configure IPv4 settings:
a. Click to expand IPv4.
b. For Type, select Static IP address.
c. For Address, type the IPv4 address and netmask, using the format IPv4_address/netmask,
for example, 192.168.3.1/24.
d. Enable the DHCP server:
i. Click to expand DHCP server.
ii. Click to toggle on Enable.
e. Disable SureLink:
i. Click to expand SureLink.
ii. Click to toggle off Enable.
6. (Optional) Configure IPv6 settings:
a. Click to expand IPv6.
b. For Type, select IPv6 prefix delegation.
IX40 User Guide
Use Digi Remote Manager to view and manage your
Local Area Networks (LANs)
183