Digi IX40 User Manual page 186

Interfaces
d. Click Add Device g .
e. For Device, select Device: ETH1.
f. Click Add Device g again and select the Device: ETH2.
4. Create a LAN interface for the bridge:
a. Click Network > Interfaces.
b. For Add Interface, type a name for the interface and click g .
c. For Zone, select Internal.
d. For Device, select the new bridge.
e. Click to expand IPv4.
f. For Address, type the IPv4 address and netmask, using the format IPv4_address/netmask,
for example, 192.168.3.1/24.
g. Enable the DHCP server:
i. Click to expand DHCP server.
ii. Click to toggle on Enable.
IX40 User Guide
Local Area Networks (LANs)
186