Table of Contents
Advertisement
Digital Input/Output and Analog Input
Configure digital Input/Output ports
Required configuration items
Whether the Input/Output pin should be handled as active low or active high.
n
The bias on the pin to enable pull-up/pull-down.
n
The direction of the pin, either Input or Output.
n
For Digital I/O 1 only:
n
The debounce period in miliseconds.
l
The default state, either On or Off.
l
Additional configuration items
n
A label for the Input/Output pin.
É
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click I/O > Digital I/Os.
4. Click to expand Digital I/O 1.
5. (Optional) For Label, enter a label for the I/O pin.
6. Click to enable Active low to configure the pin to be handled as active low. Active low is
disabled by default, meaning that the pin will be handled active high.
7. Bias is set to Pull-up by default. Select Disabled to configure the pin for pull-down instead.
8. For Direction, select either Input or Output.
If Direction is set to Output, set the Default state to either On or Off. On is the default.
n
IX40 User Guide
Configure digital Input/Output ports
Use Digi Remote Manager to view and manage your
835
Advertisement
Table of Contents
