Table of Contents
Advertisement
About the Digi IX40
Digi IX40 power supply requirements
The Digi IX40 is intended to be powered by a certified power supply with output rated at 12 to 30 volts
DCwith 2.5 amps.
n
2-pin Terminal block with screw down support, marked +/- for 12 to 30 volts DCinput
n
The Digi IX40 is intended to be powered by a certified power supply that can supply a peak
power of 8W.
n
Use the power supply part number 24000178. If you are providing the DCpower source with a
non-Digi power supply, you must use a certified LPS power supply rated at either 12 VDC/0.75
A or 24 VDC/0.375 A minimum.
n
For installations requiring protective earth grounding, connect the – terminal of the power
connector to the system protective earth with a minimum 1mm, 2-stranded single insulated
Cable. Crimp terminals should be used for all connections.
IX40 bottom view
Number
Item
1
Product label Includes information about the device:
IX40 User Guide
Description
n
Product Name
n
Part Number
n
Revision
n
QR Code
n
Password
n
Serial Number
n
Manufacturing Approval Number
Digi IX40 external hardware
40
Advertisement
Table of Contents
