Table of Contents
Advertisement
About the Digi IX40
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Firewall > Quality of Service.
4. For Add Binding, click g .
5. For Interface, select Modem.
6. For Interface bandwidth (Mbit), type 1.
7. Click to expand Policy.
8. For Add Policy, click g .
9. Click to expand Rule.
10. For Add Rule, click g .
The default settings for the policy and rule are sufficient.
11. Click Apply to save the configuration and apply the change.
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
IX40 User Guide
Use Digi Remote Manager to view and manage your
Digi IX40 hardware setup
45
Advertisement
Table of Contents
