Table of Contents
Advertisement
Interfaces
Show DHCP server status and settings
View DHCP status to monitor which devices have been given IP configuration by the IX40 device and
to diagnose DHCP issues.
É
Web
Log into the IX40 WebUI as a user with full Admin access rights.
1. On the main menu, click Status
2. Under Networking, click DHCP Leases.
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Enter the
show dhcp-lease
> show dhcp-lease
IP Address
------------- --------------- -------
192.168.2.194 MTK-ENG-USER1
192.168.2.195 MTK-ENG-USER2
>
3. Additional information can be returned by using the
> show dhcp-lease verbose
IP Address
------------- --------
192.168.2.194 MTK-ENG-USER1 May 19 08:25:11 UTC 2021 Dynamic Yes
192.168.2.195 MTK-ENG-USER2 May 20 11:32:12 UTC 2021 Dynamic Yes
>
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Default services listening on LAN ports
The following table lists the default services listening on the specified ports on the IX40 LAN
interfaces:
IX40 User Guide
command at the Admn CLI prompt:
Hostname
Expires
Hostname
Expires
------------------------ ------- ------ -----------------
Local Area Networks (LANs)
show dhcp-lease verbose
Type
Active MAC Address
command:
ba:ba:2c:13:8c:71
09:eb:10:f0:bc:16
208
Advertisement
Table of Contents
