Digi IX40 User Manual page 854

System administration
b. Reboot the device:
Update firmware from a local file
É
Web
1. Download the IX40 operating system firmware from the Digi Support FTP site to your local
machine.
Log into the IX40 WebUI as a user with full Admin access rights.
2. On the main menu, click System. Under Administration, click Firmware Update.
3. Click Choose file.
4. Browse to the location of the firmware on your local file system and select the file.
5. Click Update Firmware.
Command line
1. Download the IX40 operating system firmware from the Digi Support FTP site to your local
machine.
2. Select the device in Remote Manager and click Actions > Open Console, or log into the IX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
3. Load the firmware image onto the device. We recommend using the /tmp directory.
> scp host hostname-or-ip user username remote remote-path local local-path to local
IX40 User Guide
Applying firmware version '23.12.1.56'...
41388K
netflash: got "/tmp/cli_firmware.bin", length=42381373
netflash: authentication successful
netflash: vendor and product names are verified.
netflash: programming FLASH device /dev/flash/image1
41408K 100%
Firmware update completed, reboot device
>
> reboot
>
Update system firmware
854