Table of Contents
Advertisement
Services
Determine if the action(s) associated with the event type should be performed when the
l
device boots inside or outside of the geofence boundary.
The number of update intervals that should take place before the action(s) are taken.
l
Multiple actions can be configured for each type of event. For each action:
The type of action, either a factory erase or executing a custom script.
l
If a custom script is used:
l
o
The script that will be executed.
o
Whether to log output and errors from the script.
o
The maximum memory that the script will have available.
o
Whether the script should be executed within a sandbox that will prevent the script from
affecting the system itself.
Additional configuration items
n
Update interval, which determines the amount of time that the geofence should wait between
polling for updated location data.
É
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > Location > Geofence.
IX40 User Guide
Use Digi Remote Manager to view and manage your
Location information
578
Advertisement
Table of Contents
