Table of Contents
Advertisement
Services
-------------
Total
Shared
Message Store
-------------
Bytes
Messages
Retained messages : 40
PUBLISH Messages
----------------
Bytes sent
Bytes received : 0
Messages sent
Messages received : 0
Messages dropped : 0
>
3. Use the
show mqtt
five, and fifteen minutes.
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Use the iPerf service
Your IX40 device includes an iPerf3 server that you can use to test the performance of your network.
iPerf3 is a command-line tool that measures the maximum network throughput an interface can
handle. This is useful when diagnosing network speed issues, to determine, for example, whether a
cellular connection is providing expected throughput.
The IX40 implementation of iPerf3 supports testing with both TCP and UDP.
Note
Using iPerf clients that are at a version earlier than iPerf3 to connect to the IX40 device's iPerf3
server may result in unpredictable results. As a result, Digi recommends using an iPerf client at
version 3 or newer to connect to the IX40 device's iPerf3 server.
Required configuration items
Enable the iPerf server on the IX40 device.
n
An iPerf3 client installed on a remote host. iPerf3 software can be downloaded at
n
https://iperf.fr/iperf-download.php.
Additional configuration Items
n
The port that the IX40 device's iPerf server will use to listen for incoming connections.
n
The access control list for the iPerf server.
IX40 User Guide
: 1
: 1
: 151
: 35
: 0
: 0
command to return additional information, including averages over one,
Use the iPerf service
638
Advertisement
Table of Contents
